Hybrex ACD20 Access Control Device
* New Product *
The new Hybrex ACD20 is an RFID device designed to allow unattended portal access to authorised personnel by RFID card/fob swipe, and according to system programming for card, door - or other unit/function, and time of day.
The ACD20 contains a MiFare RFID reader/writer, a relay for control of master door relay or other device, and two sensor inputs. The sensors can be used for a remote switch door open function - like a push button inside the premises, or other uses according to system programming. MiFare RFID cards and key-fobs are available from Hybrex, and must be registered with the system to be valid. The ACD20 is designed for wall mounting, is IP44 rated, has a disconnect alarm, and is small and inobtrusive - being sized to fit a normal door jamb. It has LED illuminated logo and card indicator for easy visibility in low light and at night. The card indicator and an internal sounder provide feedback on card swipe status.
The ACD20 is a digital device connected and powered via a single pair from the main equipment and is compatible with all current Hybrex G Series systems.

Features :
  • Integrated Mifare reader/writer
  • Relay with NO/NC contacts for control of other equipment
  • Two sensor inputs for programmable usage
  • Illuminated logo and card indicator for low light / night visibility
  • Visual and audible feedback of card swipe status
  • Self-Defense (un-plug) alarm
  • Powered and operated by single pair digital wiring from system
    (nb. this is not including any relay/sensor wiring)
Electrical Specification :
  • Output : SPDT Relay : Contact Rating 1A / 30VDC
  • Input : 2 x Sensor Cct : Dry Connection :
    - Open loop > 470KOhm; Closed loop < 100 Ohm.
  • Powered from system (35~40VDC); Consumption : 100mA
Mechanical Specification :
  • Body Material : .... ABS
  • Standards : ......... IP 44
  • Color :................... Black
  • Mounting : ........... Wall Mounting
  • Dimension : ....... 99.6 L x 40 W x 24.6 H (mm.)
  • Weight : ............... 85g (net)


Environmental Specification :
  • Max / Min. Temperature (operating) :
    0º to 40º C
  • Max / Min. Temperature (storage) :
    -40º to 66º C
  • Humidity :
    0 to 95% relative
Hybrex ACP-40 Doorphone
The Hybrex ACP40 is a fully featured doorphone / intercom with a touch interface.
Housed in an aluminium case with a sealed front fascia and rear facing speaker, the ACP40 is IP44 rated meaning it is weather resistant and therefore suitable for sheltered exterior use if required. The aluminium case is finished in a deep blue varnish and the fascia is black. The ACP40 is equipped with a high visibility two line OLED display for status and messages, and a dial pad and function button set consisting of directory, program, and Call buttons. All buttons are backlit for easy use in low light conditions and provide audible and visual confirmation of use along with display messaging.

The ACP40 includes an integrated MiFare RFID reader allowing MiFare cards or tags to be used to automatically trigger the door relay - according to system programming - so allowing the ACP40 to also provide unattended portal access to authorised personnel if desired. According to system programming portal access can be configured to allow door relay operation by entry of a numeric code via the keypad, MiFare card read, or both methods together if required.

The ACP40 is a digital device connected and powered via a single pair from the main equipment and is compatible with all current Hybrex G Series systems.
The ACP40 has two sets of dry relay contacts to control devices - such as doorlock solenoid and a camera or light for example, plus a sensor for uses such as alarm, and includes self defense features such as a case open alarm and an unplug alarm.


Feature List :
  • Built-In Mifare reader
  • Keypad: Touch sensitive dial pad, function buttons, and call button
  • Intercom for indoors use
  • Door control
  • Door status indication
  • Self-Defense (un-plug) alarm
  • Case open alarm
  • One relay will activate immediately an Intercom Call is initiated and remain
    active for the duration of the call.
  • Keypad, function, and Call buttons backlit for easy low light use
  • 8 level speaker volume - controlled by system programming
  • 8 level microphone volume - controlled by system programming
  • Remote volume adjustment
  • Power over Line (PoL)
Audio Specification
  • Electronic bell:    88 dB +/- 3dB at 0.5 m
  • Speaker frequency range:    350 to 3400 Hz
  • Conversation mode:    Hands-Free Half Duplex

Mechanical Specification :

  • Body Material : .... Aluminium
  • Standards : ......... IP 44
  • Color :................... Black and Blue
  • Mounting : ........... Wall Mounting
  • Dimension : 182 L x 94 W x 36 H (mm)                        (with rubber pad)
  • Weight : ............. 628g (net)

Environmental Specification :
  • Max / Min. Temperature (operating) :
    0º to 40º C
  • Max / Min. Temperature (storage) :
    -40º to 66º C
  • Humidity :
    0 to 95% relative
Hybrex ACP-30 Doorphone

Mechanical Specification :

  • Body Material : .... Aluminum
  • Standards : ......... IP 44
  • Color :................... Black and Blue
  • Mounting : ........... Wall Mounting
  • Dimension : 130 L x 65.5 W x 33 H (mm)                        (with rubber pad)
  • Weight : ............. 282.4g (net)

Environmental Specification :

  • Max / Min. Temperature (operating) :
    0º to 40º C
  • Max / Min. Temperature (storage) :
    -40º to 66º C
  • Humidity :
    0 to 95% relative
The Hybrex ACP30 is a single button doorphone / intercom with a touch interface.
Housed in an aluminium case with a sealed front fascia and rear facing speaker, the ACP30 is IP44 rated meaning it is weather resistant and therefore suitable for sheltered exterior use if required. The aluminium case is finished in a deep blue varnish and the fascia is black. The call button and logo are backlit in blue for easy visibility in low light or darkness and the call button backlight changes to white in the active state.

The ACP30 is a digital device connected and powered via a single pair from the main equipment and is compatible with all current series Hybrex G Series systems. The ACP30 has two sets of dry relay contacts to control devices - such as doorlock solenoid and a camera for example, plus a sensor for uses such as alarm, and includes self defense features such as a case open alarm and an unplug alarm.

The ACP30 is available in two models : the ACP30-D which is as above, and the ACP30-RFID which has an integrated MiFare reader allowing MiFare cards or tags to be used to automatically trigger the door relay - according to system programming - so allowing the ACP30 to also provide unattended portal access to authorised personnel if desired.

Feature List :
  • Built-In Mifare reader - (ACP30-RFID model only)
  • Keypad: Touch sensitive call button
  • Intercom for indoors use
  • Door control
  • Door status indication
  • Self-Defense (un-plug) alarm
  • Case open alarm
  • One relay will be activated immediately after initializing the Intercom Call - and will remain active for the duration of the call.
  • Button illuminated by backlight lamp for night use
  • 8 level speaker volume - controlled by system programming
  • 8 level microphone volume - controlled by system programming
  • Power over Line (PoL)
Audio Specification
  • Electronic bell:    88 dB +/- 3dB at 0.5 m
  • Speaker frequency range:    350 to 3400 Hz
  • Conversation mode:    Hands-Free Half Duplex
Hybrex Access Control Phone

ACP

ACP also available in weather resistant form : Stainless steel front panel, with mount options of hooded stainless surface mount case, or flush mount enclosure.
(Std ACP shown for comparison)
We call it the ACP - short for Access Control Phone - it is a doorphone like device with many more functions than your average doorphone. A digital system device fed by single pair from any Hybrex G series system, the standard ACP is designed for use in sheltered or indoor situations, with exterior versions available.
The functionality of the ACP includes the following :
  • Displays system time when in the idle state; key/operation status during use.
  • Call button rings extensions with tone and displayed door name - all programmable.
  • Call to any extension by number, or even external lines (conditional).
  • RFID detector for proximity card or fob, dry contact relay to drive electric door lock.
  • Door entry by RFID card swipe, or numeric code entry, or both if required.
  • Another relay, and sensor, to detect alarm status and/or activate alarm or siren.
  • Behaves like other digital phones - handsfree intercom/answer etc.
The ACP has many different uses: as a door phone at front or back door; normal wall mount phone with handsfree answer back; two-way speaker; security control panel and access control device.
Card access by doorphone, time of day, day of week, is programmable within the Hybrex system. When used in conjunction with the free Hybrex "Access Manager" software additional features are provided such as pertinent access logs, etc.
The ACP provides an elegant solution to security, for your business or home.


RFID keys available in card or key-fob format.